PDA

View Full Version : 4m 50mm Steel Galvanished Pole



Diabolix
04-02-2010, 13:00
HI

Does anyone know where i can get a pole like this : 4m 50mm Steel Galvanished Pole ? I cannot seem to find one.

Thanx

Toady
04-02-2010, 13:06
Steel and Pipes for Africa. They in Epping 1 although they don't sell galv, just give it 2 coats of ns4 and you sorted. I bought a 6m 57x2mm for ~R170 ex, would have to double check with invoice. Else you can give ACA Staalwerke (Bellville) a call, speak to Anne-Marie, they sell galv steel just not sure if they do pipes aswell.

Diabolix
04-02-2010, 13:14
Thanx for the info Toady, do you use your whole 6 meter, because i have contacted alot of shops and they only sell 6 meter so in the end i will probly buy a 6meter and cut it.

Toady
04-02-2010, 13:18
Well my previous setup i used it all since i needed all 6m, now im in a tree so don't use a pole. If you only need 4m then have it cut but you will still be charged for the full 6m if you buying from steel and pipes for africa. ACA I'm not sure, i only bought C-Channel from them but they are quite pricy since galv doesnt come cheap... but my previous setup i just painted it with NS4 and it lasted me over 3yrs and was still in good condition when i took it down, barring the odd rust spot here and there but wasn't major, just surface rust.

Steve
06-02-2010, 17:32
I got 3 m galvanised from Scoop. My only comment was it was cut after galvanising = ends raw steel & will rust. It would be super cool if they cut then galvanised.