Remote garage door help

[SlowHands]

Hi there, does anybody perhaps have or know how to program a remote for a roller garage door, brand Superlift RD0-1?

I've searched on the internet but can't find any usefull information on how to get the remote to open the garage doors.

The doors does work manually if I press the button on the control box inside the garage, but I can't get it to work with the remote.

I will really appreciate it if someone can help.

Regards

[Toady]

Well im not to sure if the tech is still the same, but in older remotes you have a series of numbers from 1-10 ( i think ) which can either be up or down... match the sequence to that of the motor and it should work

[Mufasa]

There are a few different ways, depending on the make.
1. they have the small dip switches in, you will have to get the code off a working control.
2. the receiver in the garage needs to be put into 'learning' mode and it registers your remote when you press the button while in that mode.

My brother used to work with the stuff.

Mufasa

[SlowHands]

inside the remote? I'm not sure I will have to look. I really know nothing of these things. I'll have a look tonight when I get home and take pics if that might help anyone to help me...

[SlowHands]

I don't have a working remote...well I have 2 remotes but none of them opens the garage doors. I moved into the house in December and I haven't been able to use the remotes, except for activating and deactivating the alarm.

[Aragon]

http://www.superliftgdo.com/rdo.html

Rolling code radio system according to that. (the second type Muf mentioned)

You'll need to find out how to put the receiver into its learning state.

[wolffie02]

You will first need to make sure that the remote and receiver is from the same manufacturer.
most alarm companies use the Blue ET remotes and code learning receivers.

once you have confirmed the make and model of the receiver you can proceed from there to get the correct setup instructions.

drop me a mail and ill gladly assist if i can.